Teflon Coated Aluminum Foil

Tri-Foil® Teflon (PTFE) coated aluminum foil is made from aluminum that has been coated on one side with PTFE. It is available with or without adhesive on the foil side. Tri-Foil® PTFE coated foil is ideally suited for a variety of applications: covers for heat sealing jaws, bars, pads; covers for work stations and laboratory tables; linings for paint spray booths, ducts and conduits.

Teflon (PTFE) Coated Aluminum Foil

 

TRI-FOIL® Number

303

903

Foil Thickness, Inches (mm)

.003 (.076)

.003 (.076)

Coating Thickness, Inches (mm)

.0005 (.013)

.0005 (.013)

Adhesive Type

None

Silicone

Adhesion, oz/in (g/cm)

NA

60 (670)

Breaking Strength, lbs./in (kg/cm)

50 (8.9)

50 (8.9)

Elongation, Percentage

20

20

Max. Operating Temperature

500° F (260°C)

500° F (260° C)

Color: PTFE Side

Green

Green

Values shown are nominal and should not be used for writing specifications.

You may also need:

  • Metal Detectable Teflon Tape

    Metal detectable Teflon tape is ideal for food manufacturers who are packaging their products in poly bags. Tape that contaminates packaged food is detected

     

  • Teflon Fabric

    Our Teflon fabric consists of a fiberglass substrate which is then coated with PTFE. This combination provides a dimensionally strong non-stick surface

     

  • Teflon Zone Tape

    Teflon zone tape is primarily used in applications where it is not desirable for adhesive to come in contact with a heating element.

     

  • FEP Tape

    FEP Tape (fluorinated ethylene propylene) with silicone adhesive is often used for coil & transformer insulation

     

  • Teflon (PTFE) Tape for Packaging Machinery

    Teflon tape for packaging machinery is manufactured by coating fiberglass cloth with Teflon, The material is then etched on one side which allows it to accept an adhesive system.

     

Copyright © 2015 Andrew Roberts, Inc. All Rights Reserved Worldwide